3 Ph CT Trivector Meter

The 3 Phase CT Operated Trivector Meter is designed for metering of HT/LT consumers and for feeders. The meter has advanced data and tamper recording capabilities and is provided with communication ports

Features :-

3 Ph Whole Current Meter

ER300P is a tri-vector meter which integrates several functions and replaces various equipment for metering energy parameters. This meter is used for commercial metering and for metering of small industrial loads.

Features :-

3 Phase kWh Meter

The superiority of the EM301 3Phase kWh meter lies in its ability to work normally under reverse current, unbalance voltage and current, reversed phase sequence and voltage variation.

Features :-

• Class 1 accuracy
• LEDs indicating presence of each phase
• Withstands 440V between phase and neutral
• Maintains accuracy under current reversal conditions
• High surge withstand capability up to 8kV
• Polycarbonate enclosure
• Anti-tamper features

Acrux - Counter Type Meter

This counter meter is used in control panels to measure kWh energy. This product is available in both LT and HT models.

Features :-

• Class 1 accuracy
• kWh measurement
• 1A and 5A current rating
• Pulse LED output
• Terminal covers with sealing provision

Gemini Dual Source Meter

This panel meter is designed for dual source energy measurement. It serves as a replacement for two separate energy meters, necessary for metering applications with dual energy sources.

Features :-

• Class 1 accuracy
• AC/DC auxiliary supply
• RS 485 communication
• Password protected CT/PT value programming

mi-Energy DIN Rail Meter

mi-Energy is a DIN-rail mounted energy meter. Available in 1- and 3-phase models, these meters are useful in monitoring energy consumption in distribution boards and cabinets. With an additional Wi-Fi module, meter data can be easily viewed on laptops and smart phones.

Features :-

• LCD display
• Class 2 accuracy
• Displays day, week, month and push-to-push consumption
• Optical communication port
• Reverse current indication (for 3 phase models only)/li>

Nova Multifunction Meter

This panel meter measures voltage, current and kWh energy in a 3 phase 4 wire system. The meter has an LCD display with backlight, thus enabling ease of reading.

Range of Distribution Boards :-

• Conforms to IS 8623-1 & 3 , IEC 61439-1 & 3
• Third party certification for Ingress protection (IP) and Mechanical impact (IK)
• Perfect Blend of superior aesthetics ,contemporary feel and subtle presence that gels harmoniously with your décor
• Wide and comprehensive range of distribution boards to take care of each and every customer requirements
• Complete range of Distribution Boards is RoHS compliant

Quasar Multi-parameter Panel Meter

This meter uses DSP technology to measure both instantaneous and cumulative values in an electrical circuit. The parameters are shown on a 3-line display that can be scrolled through using push hvr-rectangle-outs.

Features :-

• The parameters are shown on a 3-line display that can be scrolled through using push hvr-rectangle-outs.
• LCD display with backlight
• CT/PT programming
• LT/HT models
• Current ratings of 1A and 5A
• RS 485 communication (optional)

RPM14 Reactive Power Manager

Reactive power manager is designed for automatic control of capacitor banks in 3 phase 4 wire LT distribution systems. The relay maintains the system power factor at a set value, under fluctuating load conditions, by connecting or disconnecting capacitor banks to the 415V bus.

Features :-

• Automatic C/K ratio selection
• Power Factor correction up to 1% of rated current
• 14 capacitor banks
• Programmable CT ratio and capacitor bank values
• Voltage, current and reactive power display

VEGA Panel Meters - VAF Meter

Features :-

• 3 line LED display
• Measures Phase voltage, Line voltage, Average voltage, Phase current, Average current, Frequency, RPM
• Models with secondary current of 5A and 1A
• Password protected programming mode through keypad includes
• RPM : Number of poles programmable from 2 to 16
• CT/PT ratio.
• Suitable for 50/60 Hz electrical systems
• Auto scaling of Kilo & Mega LEDs
• Rugged design for industrial use

Vega Panel Meters – Multifunction

Features :-

VEGA Panel Meters Single Function

Features :-

• 1 Ph & 3 Ph Voltmeter, 1 Ph & 3 Ph Ammeter, Frequency meter
• Wide operating range of auxiliary supply
• Field programmable CT/PT ratio with password protection
• Auto scaling of kilo and Mega
• Displays average and phase quantities*
• Auto and manual scrolling *
• Phase indication of displayed parameter through LED*
• Ammeter with secondary currents of 1A and 5A.

1 Phase Distribution Transformer Meter

This single phase meter designed for DT metering offers higher accuracy and better features to suit the customer’s requirements.

Features :-

• Class 0.5s accuracy for active and class1.0 accuracy for reactive as per IS & IEC standards
• CT operated meter with 5A (Ib) to 10A (Imax)
• Pulse LED output
• Indication for power on, current reversal, earth load tamper (ELT) and neutral missing
• Load Survey, reset backups and TOD features
• Optical port

3 Phase ABT Meter

L&T’s high accuracy availability based tariff (ABT) meters provide a flexible solution for energy monitoring and billing bulk inter utility power flows.

Features :-

• Class 0.2s accuracy
• 3 Phase 4 Wire
• Conforms to IEC and IS standards
• 15 minute block average for frequency and energy
• Frequency coding for billing
• Separate reactive energy registers linked to supply voltage
• Midnight storage of energies
• Load Survey
• Optical port/RS 485 communication (optional)

3 Phase CT Operated Trivector Meter

This meter is designed for metering of HT/LT consumers and for feeders. The meter has advanced data and tamper recording capabilities and is provided with communication ports.

Software is available for data collection, load survey analysis and energy management applications. The meter can be interfaced to a variety of communication devices.

Features :-

3 Phase Distribution Transformer Meter

This meter is designed for metering of distribution transformers via a set of external CTs. The meter has advanced data and tamper recording capabilities and is provided with communication ports.

Software is available for data collection, load survey analysis and energy management applications. The data can also be used to perform energy accounting and energy audit functions. This meter can be interfaced to a variety of communication devices.

Features :-

1 Phase Meter

This compact EM101+ single phase meter fits snugly into any meter box. The bright back-lit display ensures ease of reading.

Features :-

• Class 1 accuracy as per IS and IEC standards
• Forward energy recording irrespective of current direction
• Indication for power on, current reversal and ELT
• Reset backups
• Multi-tariff / Time of the Day metering
• High surge withstand capability
• Load Survey (Interval Data)
• Anti-tamper features
• Optical port/RS 232 port/Low Power Radio (optional)